877-535-9988

foundations and footings explained

What’s the best source for Local Building Codes?

To make this guide highly informative, we need to fix a few issues in the original text:
1. The missing transition: The original jumps from “soil test” straight to “by being wider than the walls” (without explaining what “they” are—footings).
2. Lack of local context: For a guide specifically about the Wasatch Front, it should mention why our local dirt is so unique (ancient Lake Bonneville clay, sandy benches, and seismic/earthquake risks).
3. Incomplete inspection list: “Typically, they will inspect…” stops abruptly. We need to define who “they” are and what else they look for.

Here is a revised, highly informative version, followed by a breakdown of what was changed.


Building on Solid Ground: Your Guide to Footings and Foundations on the Wasatch Front

Quick Look: The Ground Rules

No time to read the whole guide? Here is the golden rule: Soil testing is always step one.

Along Utah’s Wasatch Front, soil conditions can change drastically in just a few blocks—shifting from the solid gravel benches of the ancient Lake Bonneville shoreline to the soft, collapsible clays of the valley floors. Because of this variability, and the region’s high seismic activity, local cities require a professional geotechnical soil test before issuing a building permit.

This test determines the design of your footings—the thick concrete bases that sit beneath your foundation walls. By being wider than the walls built on top of them, footings act like snowshoes, spreading the immense weight of your home safely across a larger area of soil.

Before any concrete is poured, city inspectors or geotechnical engineers must approve the excavation. Typically, they will inspect:

  • The Trench Depth: Verifying it is dug below the local frost line—typically 30 inches along the Wasatch Front—to prevent the foundation from shifting during winter freeze-and-thaw cycles.
  • Soil Strength (Bearing Capacity): Ensuring the soil at the bottom of the trench is undisturbed, compacted, and strong enough to support the engineered weight of the home.
  • Steel Reinforcement (Rebar): Checking that the steel rebar is placed correctly within the trench to give the concrete the tensile strength needed to withstand earthquakes along the Wasatch Fault.

Why these changes make it more informative:

  • Added Wasatch Front Context: Mentioning Lake Bonneville gravel, valley clays, and the Wasatch Fault explains why the soil test is so strictly required in Utah.
  • Fixed the Grammatical Flow: Defined what “footings” are before explaining how they act like “snowshoes” to distribute weight.
  • Specific Local Data: Added the actual frost line depth for the Wasatch Front (30 inches), which is crucial practical knowledge for a builder or homeowner.
  • Completed the Inspection List: Clarified who “they” are (city inspectors/engineers) and added the other two critical things they look for alongside the trench depth: soil strength and rebar.

Building on Solid Ground: Your Guide to Footings and Foundations on the Wasatch Front

Quick Look: The Ground Rules

Don’t have time to read the whole guide? Here is what you need to know about building in Utah:

  • Footings are the wide concrete bases that spread out a building’s weight.
  • Foundations are the walls that sit on top of the footings.
  • The Wasatch Front has unique rules because of earthquakes, freezing winter weather, and different types of soil.
  • Local building codes require you to dig at least 30 inches deep to protect against frost, and you must design your home to resist shaking.

Building on Rock and Roll: Why Your Home Needs a Strong Start

Imagine building a giant tower out of toy blocks on top of a soft mattress. What happens? It wobbles, tips, and falls over. The same thing can happen to a real house if it does not have a strong base. Along Utah’s Wasatch Front—from Ogden down to Provo—building a home requires extra planning. Our beautiful mountains look solid, but the ground beneath our feet can move, freeze, and shift.

Local building codes are like a rulebook for safety. They make sure that every new building can stand up to Utah’s snowy winters and active earthquake zones. To understand these rules, we first have to look at the two most important parts of any building’s base: footings and foundations.

Footings vs. Foundations: What is the Difference?

Many people use the words “footing” and “foundation” to mean the same thing, but they are actually two different parts of a structure. They work together like your feet and your legs to keep you standing upright.

What is a Footing?

Think of a footing as a snowshoe for your house. If you walk on deep snow in regular boots, you sink. If you wear wide snowshoes, your weight spreads out, and you stay on top of the snow. A footing does the exact same thing for a building.

Footings are wide trenches filled with concrete and reinforced with steel bars called rebar. They sit deep in the ground, directly on the dirt. By being wider than the walls built on top of them, they spread the heavy weight of the house across a larger area of soil. This stops the house from sinking into the earth.

What is a Foundation?

The foundation is the structure built on top of the footings. These are usually thick concrete walls that form your basement or crawlspace. The foundation acts as the platform that holds up the wooden frame of your home. It also keeps moisture and cold air from sneaking in from the dirt around your house.

The Wasatch Front’s Special Challenges

Building a home in Salt Lake City or Sandy is very different from building a home in Florida. The Wasatch Front has unique geography and weather that require special building codes.

1. The Wasatch Fault Zone (Earthquakes)

The Wasatch Front sits right on top of a major fault line. Because of this, local building codes place our area in a high seismic hazard category. This means our buildings must be ready for earthquakes.

Seismic Reinforcement

To keep homes safe during a quake, local codes require extra steel rebar inside the concrete footings and foundations. This steel gives the concrete flexibility so it can bend slightly without snapping when the ground shakes.

2. The Freeze and Thaw Cycle

Utah winters are cold. When water in the soil freezes, it expands. If water gets under your home’s base and freezes, it can lift the entire concrete structure. This is called “frost heave,” and it can crack your walls and ruin your home.

The 30-Inch Frost Line Rule

To prevent frost heave, the Wasatch Front building codes require all footings to be buried at least 30 inches deep. In some mountain areas, they must go even deeper. This ensures the footings sit below the depth where the ground freezes, keeping your home resting on warm, stable soil all year long.

3. Collapsible and Sandy Soils

The soil along the Wasatch Front changes quickly. Near the mountains, the ground is rocky. Down in the valley, near the Great Salt Lake, the soil can be sandy or full of clay that swells when wet. Some areas have “collapsible soil,” which can suddenly shrink when it gets wet, causing a house to tilt.

Local Building Codes: What You Need to Know Before You Dig

Before you pour any concrete in Utah, you must follow the rules set by your local city or county building department. These departments use the International Residential Code (IRC) but add their own specific rules for Utah’s climate and geology.

Soil Testing is the First Step

Because the dirt can change from one neighborhood to the next, cities often require a soil test before you get a building permit. A soil engineer will dig a hole on your property, test the dirt, and write a report. This report tells the builder how wide the footings need to be to support the weight of your house safely.

The Inspection Process

You cannot just pour concrete and keep building. City inspectors must visit your construction site at specific times to make sure everything matches the local codes. Typically, they will inspect:

  • The Trench: To make sure it is dug deep enough (below the frost line) and the soil is strong.
  • The Rebar: To make sure the steel bars are placed correctly before the concrete is poured.
  • The Finished Foundation: To check for cracks and ensure the concrete has cured properly.

Putting It All Together: Your Blueprint for Success

Building a strong home along the Wasatch Front is all about understanding the earth beneath you. Footings act like snowshoes to spread your home’s weight, while foundation walls hold your house up and keep the weather out. Because Utah faces unique challenges like earthquakes, freezing winter temperatures, and shifting soils, local building codes are very strict.

By burying footings at least 30 inches deep to avoid frost, adding plenty of steel rebar to protect against earthquakes, and testing your soil before you dig, you ensure that your home will stand strong for generations. Following these local rules does not just help you pass inspections—it protects your family, secures your investment, and gives you peace of mind in our beautiful mountain valley.


More on foundations and footings…

FREE Estimates for all types of concrete work

FREE Quotes 🌟 Call Now